Rimpact Pro/Original Mix
Protect your Rims. Protect your Ride. Protect your Race.
Contents Per Pack:
- 1x PRO Tyre Insert
- 1X ORIGINAL Tyre Insert
- 2x 44mm or 55mm Rimpact Unblockable Valves (55mm Valves are suitable for Deep Dish Rims only)
Rimpact was born out of a passion for Mountain Biking, design and continuous improvement. Rimpact is a foam insert that hugs your wheels and absorbs square edge hits so your rims don't have to.
After the Insert's initial success through 2018 and 2019 Rimpact have continued to modify and evolve it, learning from feedback and performance test results. Eventually re-releasing the Insert with visually subtle but significant changes as the Rimpact ORIGINAL.
Rimpact learned so much from the thousands of Rimpact Inserts sold around the Globe that they began working on a new Insert from the ground up. The Result is the Rimpact PRO, a dual density design.
Rimpact PRO is Rimpacts most protective insert. It utilises an Energy Sensitive layer in conjunction with Rimpact ORIGINAL foam to harden on impact and dissipate extreme forces across itself and the foam below rather than into the rim. The material remains supple and malleable meaning its easy to install yet when it counts, Rimpact steps it up to maximum protection mode and allows you to ride it out when there's no easy line choice!
Rimpact Pro/Original Mix is the perfect choice for aggressive Trail riding and/or Enduro applications
Every Rimpact Insert is made in the UK!
Rimpact Pro/Original Mix is suitable for rims with an inner diameter of 23mm - 35mm and tyre widths 2.3" - 2.6". It is possible to use the insert with narrower or wider tyres but it will increase the difficulty of fitting. Do not purchase if your rims are out side of this spec.
Weight: approx for PRO - 160g per insert for 29", 150g approx for 27.5" | for ORIGINAL approx 90g for 27.5 and 95g for 29".